Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1524 (Interior Trim And Paneling) >> Repair Instructions >> Child Restraint Tether Anchor Bezel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Tether Anchor Bezel
    GM1306877Courtesy of GENERAL MOTORS CORP.
  1. Install the tether anchor bezel by pushing down on the sides.
  2. Move the rear seat back to the upright position.
scientia non olet · About Mike's Workshop Manuals