Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1468 (Mirror System & Window System) >> Repair Instructions >> Windshield Upper Reveal Molding Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Upper Windshield Molding
    GM929841Courtesy of GENERAL MOTORS CORP.
  1. Apply a small amount of urethane adhesive to the top edge of the windshield.
  2. Install the new roof molding to windshield by pressing firmly into place.
  3. Install the windshield. Refer to Windshield Replacement .
scientia non olet · About Mike's Workshop Manuals