Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1464 (Door System, Mirror System & Window System) >> Repair Instructions >> Window Weatherstrip Run Channel Assembly Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Window Weatherstrip Run Channel Assembly
    GM943449Courtesy of GENERAL MOTORS CORP.
  1. Align the notch in the window weatherstrip seal to the fixed glass post and press the weatherstrip onto the window flange.
    • Press the weatherstrip run channel onto the door flange.
    • Check to make sure the channel is fully secured into the upper corners of the door frame.
  2. Install the rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door .
scientia non olet · About Mike's Workshop Manuals