Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Air Bag Restraint Systems) >> Diagnostic Tests >> DTC B0077,B0078,B0079, B0080,B0081,B0082: Driver Sis Valid Identification Message Not Received/Passenger Sis Valid Identification Message Not Received/Driver Sis Identification Error/Driver Sis NOK Message/Passenger Sis Identification Error/Passenger Sis NOK Message >> Conditions For Setting DTC

Conditions For Setting DTC

WARNING: This page is about a different car, the 2002 Pontiac Aztek. However, it is still accessible from the selected car via links, so may be relevant.

DTC B0077 will set when SDM does not receive a valid identification message within 5 seconds of driver-side SIS being powered up, status message is not retrieved or SDM has reset SIS twice without detecting valid identification message. DTC B0078 will set when SDM does not receive a valid identification message within 5 seconds of passenger-side SIS being powered up, status message is not retrieved or SDM has reset SIS twice without detecting valid identification message.

DTC B0079 will set when SDM receives an identification message from driver-side SIS that does not match identification stored in memory or after SDM has tried twice to reset SIS without detecting correct identification message. DTC B0081 will set when SDM receives an identification message from passenger-side SIS that does not match identification stored in memory or after SDM has tried twice to reset SIS without detecting correct identification message.

DTC B0080 will set when SDM has received a Not Okay (NOK) message from driver-side SIS. DTC B0082 will set when SDM has received a Not Okay (NOK) message from passenger-side SIS.

scientia non olet · About Mike's Workshop Manuals