Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Refer to GLASS & SHEET METAL HANDLING CAUTION .

IMPORTANT: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.

Close the liftgate before removing the liftgate window.
Open the liftgate window.

Fig 1: Disconnecting Rear Defogger Plug

Courtesy of GENERAL MOTORS CORP.

Disconnect the rear defogger plug from the liftgate window.

Fig 2: Removing Struts

Courtesy of GENERAL MOTORS CORP.

Remove the struts from the liftgate window. Refer to STRUT REPLACEMENT - LIFT GATE WINDOW .

Fig 3: Removing Liftgate Window

Courtesy of GENERAL MOTORS CORP.

CAUTION: If a window is cracked but still intact, crisscross the window with masking tape in order to reduce the risk of damage or personal injury.

With the aid of an assistant remove the window (1) from the closed liftgate. Remove the C-clips from the liftgate window hinges, NOT from the liftgate.
Slide the liftgate window toward the left of the vehicle and lift off.