Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Power Seat System) >> Repair Instructions >> Seat Back Recliner Handle Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Important:  The keys on the recliner handle must properly align to the keyways on the recliner handle shaft.

  1. Position the seat back recliner handle to the seat back recliner handle shaft.
  2. Install the seat back recliner handle to the seat back recliner handle shaft pressing on until properly seated.
    Fig 1: Installing Seat Back Recliner Handle
    G01722557Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the screw to the seat back recliner handle.

    Tighten 

    Tighten the seat back recliner screw to 2 N.m (18 lb in).

    Fig 2: Installing Seat Back Recliner Handle Screw
    G01722558Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals