Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Power Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Rear (Split Bench) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear seat back pad to the rear seat back frame. Refer to Seat Back Pad Replacement - Rear (Bucket)  or Seat Back Pad Replacement - Rear (Split Bench) .
  2. Install the rear seat back cushion cover. Refer to Seat Back Cover Replacement - Rear (Bucket)  or Seat Back Cover Replacement - Rear (Split Bench) .
  3. Install the rear seat back. Refer to Seat Back Replacement - Rear (Split Bench)  or Seat Back Replacement - Rear (Bucket) .
  4. Install the split bench seat. Refer to Seat Replacement - Rear 50-50 Split .
    Fig 1: Removing Rear Seat Back Cover And Pad
    G01722686Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals