Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Power Seat System) >> Repair Instructions >> Lumbar Replacement - Front Seat >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the lumbar support to the mounting holes in the front seat back.
  2. Install the lumbar support to the front seat back, pressing into place until fully seated.
    Fig 1: Installing Lumbar Support
    G01722562Courtesy of GENERAL MOTORS CORP.
  3. Install the lumbar support cable to the lumbar support control.
    Fig 2: Installing Lumbar Support Cable
    G01722563Courtesy of GENERAL MOTORS CORP.
  4. Install the lumbar support cable to the lumbar support control.
  5. Install the front seat back pad. Refer to Seat Back Pad Replacement - Front .
  6. Install the front seat back cover. Refer to Seat Back Cover Replacement - Front .
  7. Install the front seat. Refer to Seat Replacement - Bucket .
    Fig 3: View Of Lumbar Support Control
    G01722564Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals