Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1364 (Wiper System & Washer System) >> Repair Instructions >> Wiper Arm Blade Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the hook of the wiper arm through the opening in the wiper blade.
    Fig 1: Inserting Hook Of Wiper Arm
    G01577382Courtesy of GENERAL MOTORS CORP.
  2. Position the wiper blade pivot in the inside radius of the wiper arm hook.
  3. Pull the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
  4. Operate the wipers and inspect for proper operation.
    Fig 2: Positioning Wiper Blade Pivot
    G01577383Courtesy of GENERAL MOTORS CORP.