Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1363 (Lighting Systems) >> Repair Instructions >> Hazard and Turn Signal Flasher Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the flasher (1) to the fuse block until the retainer clicks into place.
  2. Install the knee bolster. Refer to KNEE BOLSTER REPLACEMENT .
    Fig 1: Locating Hazard & Turn Signal Flasher
    G01577265Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals