Sir CLOCKSPRING Assembly: Installation

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2001 Pontiac Firebird, 2001 Pontiac Bonneville, 2001 Chevrolet Monte Carlo, 2001 Chevrolet Impala, and 2001 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Use care not to pinch wires when installing components. After wiring is fed through column, attach CAUTION tag to wiring near connector at base of steering column. Tag is included in SIR clockspring assembly repair kit.

To install, reverse removal procedure. Ensure clockspring assembly hub and steering shaft are centered before installing clockspring assembly. After clockspring assembly is installed, remove slack from clockspring assembly wiring in steering column to prevent wire damage. Activate SIR system. See DISABLING & ACTIVATING AIR BAG SYSTEM .