Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1184 (Door System, Mirror System & Window System) >> Repair Instructions >> Reflector Replacement - Front Door Warning (Aztek) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the front door.
  2. Apply protective coating/tape at the point of insertion of the flat bladed tool.
  3. Remove the warning reflector from the front door trim panel using a small flat bladed tool, pressing on the tabs from the top of the warning reflector.
    Fig 1: Removing Front Door Warning Reflector Using Small Flat Bladed Tool (Aztek)
    G01722228Courtesy of GENERAL MOTORS CORP.
  4. Remove the warning reflector from the front door trim panel.
    Fig 2: Removing Warning Reflector (Aztek)
    G01722229Courtesy of GENERAL MOTORS CORP.