Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1159 (Engine Exhaust System) >> Repair Instructions >> Catalytic Converter Heat Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the catalytic converter heat shield.
  2. Install new catalytic converter heat shield rivets.
  3. Install the catalytic converter. Refer to CATALYTIC CONVERTER REPLACEMENT .
    Fig 1: Catalytic Converter Heat Shield
    G01971245Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals