Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1083 (Wiper System & Washer System) >> Repair Instructions >> Wiper Arm Blade Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Wiper Blade At Wiper Arm Hook
    GM497492Courtesy of GENERAL MOTORS CORP.
  1. Insert the hook of the wiper arm through the opening in the wiper blade.
    2. Fig 2: View Of Wiper Blade Clip
    GM497481Courtesy of GENERAL MOTORS CORP.
  2. Position the wiper blade pivot in the inside radius of the wiper arm hook.
  3. Pull the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
  4. Inspect for proper operation.
scientia non olet · About Mike's Workshop Manuals