Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1070 (Body Rear End) >> Repair Instructions >> Pullstrap Replacement - Liftgate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the lift gate.
  2. Remove the screw from the pullstrap.
    Fig 1: View Of Pullstrap Retaining Screws
    GM855498Courtesy of GENERAL MOTORS CORP.
  3. Remove the pullstrap
scientia non olet · About Mike's Workshop Manuals