Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1053 (Door System, Mirror System & Window System) >> Repair Instructions >> Power Window Switch Replacement - Right Front (Aztek) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door window switch plate from the front door trim panel using a small flat-bladed tool at the front of the power window control plate.
  2. Disconnect the electrical connector from the front door window control switch.
  3. Remove the front door window control switch plate from the front door trim panel.
    Fig 1: Locating RF Power Window Switch (Aztek)
    GM709385Courtesy of GENERAL MOTORS CORP.
  4. Remove the front door window control switch (1) from the front door window switch plate using a small flat-bladed tool.
scientia non olet · About Mike's Workshop Manuals