Right Front, Left Rear Or Right Rear Window Is Inoperative At

INDIVIDUAL SWITCH, OPERATES AT MASTER SWITCH

1. Turn ignition switch to RUN position. Press window lock-out switch to off position (if equipped). Using a test light, backprobe between ground and Brown wire terminal (2-door) or between ground and Light Blue wire terminal (4-door) at inoperative window switch connector. If test light is on, go to next step. If test light is off, repair open in Light Blue wire or Brown wire between master switch and inoperative window switch. If wires are okay, replace master switch.
2. Backprobe between Dark Blue wire and Brown wire terminals at inoperative window switch connector. While observing test light, press inoperative window switch to up and down position. If test light is on, repair open in Dark Blue wire or Brown wire between inoperative window switch and motor. If wires are okay, replace motor. If test light is off, check for poor connection at inoperative window switch. If connection is okay, replace inoperative window switch.