DTC P0300-0304: Multiple Cylinder Misfire: Notes
NOTE:
For circuit identification and wiring diagram, see WIRING DIAGRAMS article. If Powertrain Control Module (PCM) is replaced, PCM must be reprogrammed. See PROGRAMMING
. After each repair procedure has been completed, reconnect all components. Perform POWERTRAIN VERIFICATION TEST VER-5
under VERIFICATION TESTS to ensure system is functioning properly.
NOTE:
For DTC and cylinder misfire identification, see CYLINDER MISFIRE IDENTIFICATION
table.
CYLINDER MISFIRE IDENTIFICATION
| DTC | Cylinder No. | ||
|---|---|---|---|
| P0300 | (1) | ||
| P0301 | 1 | ||
| P0302 | 2 | ||
| P0303 | 3 | ||
| P0304 | 4 | ||
|
|||