Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Plymouth >> 1997 >> Voyager Base, 2.4 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Body Control Computer) >> Removal & Installation >> Body Control Module (BCM) >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1996 Plymouth Voyager, 1996 Plymouth Grand Voyager, 1996 Dodge Grand Caravan, 1996 Dodge Caravan, and 1996 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable.
  2. Remove lower steering column cover and knee-blocker reinforcement.
  3. Disconnect 2 wire connectors from bottom of BCM.
  4. Remove bolts holding junction to dash panel mounting.
  5. Remove junction block from mounting bracket.
  6. Remove screws holding BCM to junction block.
  7. Slide BCM downward to disengage guide studs on junction block from channels on BCM mounting bracket.
  8. Remove BCM from junction block.
  9. To install, reverse removal procedure.
scientia non olet · About Mike's Workshop Manuals