Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Plymouth >> 1996 >> Breeze Automatic >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Computer >> Diagnostic Charts >> Power Door Lock Test 8A - Identifying RKE Problems >> Remote Keyless Entry (RKE) Does Not Operate

Remote Keyless Entry (RKE) Does Not Operate

  1. Ensure Body Control Module (BCM) is ACTIVE ON THE BUS. Go to SYMPTOM ID TEST 1A.
  2. Using scan tool, select READ DTCs and look for NO POWER TO MODULE trouble code. If NO POWER TO MODULE trouble code is present, see appropriate VEHICLE COMMUNICATIONS article.
  3. Check RKE transmitter battery voltage. If battery voltage is less than 3 volts, replace battery.
  4. Using scan tool, select PROGRAM RKE and reprogram RKE transmitter according to scan tool instructions. If RKE system still does not operate, replace BCM.
NOTE: If vehicle is equipped with Remote Keyless Entry (RKE), there will be a RKE antenna terminal at back of BCM. Antenna connector will have a single White wire terminal above instrument panel 10-pin connector.
scientia non olet · About Mike's Workshop Manuals