Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Plymouth >> 1994 >> Laser Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Testing >> Self-Diagnostic Tests >> Chart No. 9, Checking Circuits Related To Accelerator Switch Off Function (A/T)

Chart No. 9, Checking Circuits Related To Accelerator Switch Off Function (A/T)

  1. Turn ignition switch to ON position. Using a voltmeter, connect voltmeter leads between Cruise Control Module (CCM) connector terminal No. 3 (Blue/Red wire) and ground. Voltmeter should read battery voltage.
  2. Move voltmeter leads to CCM connector terminal No. 9 (Brown/Red wire) and ground. When accelerator pedal is depressed, voltmeter should read zero volts. When accelerator pedal is released, voltmeter should read battery voltage.
scientia non olet · About Mike's Workshop Manuals