Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Plymouth >> 1989 >> Colt Base >> Repair and Diagnosis >> Engine Performance >> System >> System/Component Tests - PFI >> Emission Systems & Sub-Systems >> Exhaust Gas RECIRCULATION (EGR) System >> EGR Temperature Sensor

EGR Temperature Sensor

  1. Remove EGR temperature sensor. Place EGR temperature sensor in water. While increasing water temperature, measure resistance between terminals.
  2. At a temperature fo 122°F (50°C), a resistance of 60,000-80,000 ohms should be present. At a temperature of 212°F (100°C), a resistance of 11,000-14,000 ohms should be present. Replace EGR temperature sensor if there is a significant resistance difference from specifications.
scientia non olet · About Mike's Workshop Manuals