Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Oldsmobile >> 2004 >> Bravada RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1768 (Antilock Brake System And Traction Control System) >> Repair Instructions >> Traction Control Switch Replacement (GMC, Chevrolet) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (GMC) or Trim Plate Replacement - Instrument Panel (I/P) Accessory (Buick) or Bezel Replacement - Instrument Panel (I/P) Cluster (Chevrolet) or Bezel Replacement - Instrument Panel (I/P) Cluster (GMC, Buick) in Instrument Panel, Gages, and Console.
    2. Fig 1: Removing/Installing Traction Control Switch Electrical Connector
    GM651279Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector from the traction control switch.
  3. Release the traction control switch locking tabs located behind the trim plate.
  4. Remove the traction control switch from the trim plate
scientia non olet · About Mike's Workshop Manuals