Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Oldsmobile >> 2004 >> Bravada AWD >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Cooler Replacement (4.2L) >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Power Steering Cooler
    GM687449Courtesy of GENERAL MOTORS CORP.
  1. Install the power steering cooler to the radiator support.
    2. Fig 2: Removing/Installing Power Steering Cooler Mounting Bolts
    GM687448Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the power steering cooler mounting bolts.

    Tighten:  Tighten the power steering cooler mounting bolts to 20 N.m (15 lb ft).

    3. Fig 3: View Of Power Steering Hose Assembly At Power Steering Cooler
    GM687441Courtesy of GENERAL MOTORS CORP.
  3. Connect the power steering hoses assembly to the power steering cooler.
  4. Remove drain pan from under the vehicle.
scientia non olet · About Mike's Workshop Manuals