Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Oldsmobile >> 2004 >> Bravada AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1734 (Stationary Window System) >> Repair Instructions >> Ambient Air Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the sensor to the panel assembly.
    2. Fig 1: Ambient Air Temperature Sensor Electrical Connector
    GM769370Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector to the sensor (1).
    3. Fig 2: Panel Assembly And Ambient Air Temperature Sensor
    GM713860Courtesy of GENERAL MOTORS CORP.
  3. Install the sensor (1) to the panel assembly (2).
  4. Install the front grille. Refer to Grille Replacement (Envoy, Envoy XUV) or Grille Replacement (TrailBlazer) or Grille Replacement (Rainier) in Exterior Trim.
scientia non olet · About Mike's Workshop Manuals