Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Oldsmobile >> 2003 >> Bravada AWD >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Multifunction, Turn Signal Switch Replacement >> Removal Procedure

Removal Procedure

  1. Disable the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM in Air Bag Restraint Systems.
  2. Remove the upper and lower trim covers. Refer to STEERING COLUMN TRIM COVERS REPLACEMENT   .
  3. Tilt the column to the CENTER position.
  4. Disconnect the connectors from the turn signal and multifunction switch assembly.

    Remove 2 pan head tapping screws from the turn signal and multifunction switch assembly.

  5. Remove the turn signal and multifunction switch assembly.
    Fig 1: Removing Turn Signal & Multifunction Switch Assembly
    G01597199Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals