Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Oldsmobile >> 2003 >> Bravada AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Mirror Lens Replacement - Turn Signal >> Removal Procedure

Removal Procedure

  1. Carefully move the outside rear view mirror (ORVM) assembly forward in order to gain access to the lens retaining screw (1) located underneath the assembly, near the pivot point.
  2. Remove the lens retaining screw.
    3. Fig 1: Removing Lens Retaining Screw
    G01641630Courtesy of GENERAL MOTORS CORP.
  3. Remove the lens from the ORVM assembly.
  4. Remove the socket and the lamp from the lens by turning the socket counterclockwise.
    5. Fig 2: Removing Socket And Lamp From Lens
    G01641631Courtesy of GENERAL MOTORS CORP.
  5. If replacing the bulb, remove the bulb from the socket.
scientia non olet · About Mike's Workshop Manuals