Installation Procedure
- If installation of the mounting bracket is required, install the mounting bracket to the overhead console.NOTE: Refer to Fastener Notice in Cautions and Notices.
- Install the 2 OnStar® microphone retaining screws.
Tighten
Tighten the screws to 0.8 N.m (7 lb in).
- Install the microphone to the mounting bracket ensuring the quick release tab (1) is fully seated.
- Connect the electrical connector to the OnStar® microphone (1).
- Install the overhead console. Refer to OVERHEAD CONSOLE REPLACEMENT - FRONT in Interior Trim.