Checking Fluid Level
WARNING: This page is about a different car, the 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
Raise and support vehicle. Remove the fill plug and verify that the fluid is at the brim of the fill plug hole. See Fig 1 . On 5-speed models, discard washer from fill plug. If fluid level is low, add the specified fluid at the fill plug hole. See RECOMMENDED FLUID . Wipe the fill plug clean and apply sealant to the plug threads before installing. On 6-speed models, install new washer onto fill plug and install. Tighten fill plug to specification. See TORQUE SPECIFICATIONS .