Serial Data Power Mode
Power Mode Master (PMM) is Dash Integration Module (DIM). DIM uses ACC voltage, RUN/START voltage, IGNITION 3 voltage and OFF/RUN/STARTvoltage to determine power mode. For power mode combinations, see POWER MODES .
POWER MODES
| Ignition Switch Position | ACC | IGNITION 3 | RUN/START | OFF/RUN/START | Power Mode |
|---|---|---|---|---|---|
| OFF | Inactive | Inactive | Inactive | Inactive | Off/Awake Or RAP |
| ACC | Active | Inactive | Inactive | Active | Accessory |
| START | Inactive | Inactive | Active | Active | Start/Crank |
| RUN | Active | Active | Active | Active | Run |