Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Oldsmobile >> 2001 >> Intrigue GL >> Repair and Diagnosis >> External Pages >> Different car >> Section 587 (Power Seat System) >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power seat switch to the finish trim panel.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the power seat switch screws.

    Tighten 

    Tighten the power seat switch screws to 3 N.m (27 lb in).

  3. Install the finish trim panel. Refer to Trim Panel Replacement - Front Seat .
    Fig 1: Installing Power Seat Switch Screws
    G01833226Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals