Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Oldsmobile >> 2001 >> Bravada >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Modules >> Self-Diagnostic System >> Door Systems Diagnostic System Check

Door Systems Diagnostic System Check

  1. Ensure ignition switch is in OFF position. Connect scan tool to Data Link Connector (DLC). If scan tool powers up, go to next step. If scan tool does not power up, see TEST B: SCAN TOOL INOPERATIVE  under SYSTEM TESTS.
  2. Turn ignition switch to ON position. Attempt to communicate with BCM. If scan tool communicates with BCM, go to next step. If scan tool does not communicate with VIU, see TEST A: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE  under SYSTEM TESTS.
  3. Select BCM display DTCs function on scan tool. If DTCs are displayed, go to next step. If DTCs are not displayed, repair by symptom. See appropriate POWER DOOR LOCKS article.
  4. If scan tool displays DTCs which begin with "U", see TEST A: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE  under SYSTEM TESTS. If any other DTCs are recorded, go to next step.
  5. Repair as necessary. See DIAGNOSTIC TROUBLE CODE DEFINITIONS .
scientia non olet · About Mike's Workshop Manuals