Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Oldsmobile >> 2000 >> Intrigue GLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 467 (Anti-Lock Brake System) >> Repair Instructions >> Brake Fluid Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: To prevent equipment damage, never connect or disconnect the wiring harness connection from the EBCM with the ignition switch in the ON position.
  1. Loosen the two retaining nuts and carefully reposition the EBCM to access the brake pressure sensor.
  2. Disconnect the brake pressure sensor electrical connector.
  3. Remove the brake pressure sensor from the vehicle.
scientia non olet · About Mike's Workshop Manuals