Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Oldsmobile >> 1998 >> Cutlass Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Supplemental Inflatable Restraint System) >> Testing - Diagnostic >> DTC B1026: Driver Deployment Loop Open >> Conditions For Setting DTC

Conditions For Setting DTC

WARNING: This page is about a different car, the 1998 Pontiac Grand Am, 1998 Oldsmobile Achieva, and 1998 Buick Skylark. However, it is still accessible from the selected car via links, so may be relevant.

DTC sets when voltage difference between DRIVER HIGH terminal No. 2 and DRIVER LOW terminal No. 3 is greater than or equal to 400 millivolts for 500 milliseconds during DEPLOYMENT LOOP CONTINUITY, RESISTANCE MEASUREMENT, or CONTINUOUS MONITORING tests.

scientia non olet · About Mike's Workshop Manuals