Disabling System
WARNING: This page is about a different car, the 1997 Oldsmobile Cutlass and 1997 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When AIR BAG fuse is removed and ignition switch is in RUN, the AIR BAG warning light will be on. This does not indicate a system malfunction.
- Turn steering wheel to place vehicle wheels in straight-ahead position. Turn ignition switch to LOCK position.
- Remove AIR BAG fuse from left instrument panel bussed electrical center. Remove instrument cluster insulator. Remove Connector Position Assurance (CPA) clip and disconnect driver-side Yellow 2-way connector at base of steering column. Remove instrument panel compartment (glove compartment) insulator. Disconnect passenger-side CPA and passenger-side Yellow 2-way connector, located behind instrument panel compartment (glove compartment), from air bag module pigtail.