Removal & Installation
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 1999 Pontiac Sunfire, 1999 Pontiac Grand Am, 1999 Oldsmobile Intrigue, 1999 Oldsmobile Cutlass, and 1999 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
Locate EBCM/EBTCM. See EBCM/EBTCM LOCATION . Disconnect negative battery cable. Remove necessary components to gain access to EBCM/EBTCM. Release pressure tabs or retaining nuts attaching EBCM/EBTCM to bracket. Disconnect EBCM/EBTCM electrical connectors. Remove EBCM/EBTCM from vehicle. To install, reverse removal procedure.
EBCM/EBTCM LOCATION
| Application | Location | |
|---|---|---|
| "J" Body | Inside Left Front Fender | |
| "N" Body | ||
| 1998 Achieva, Grand Am & Skylark | On Right Side Of Firewall, In Engine Compartment | |
| 1999 Alero & Grand Am | Inside The Left Front Fender | |
| Cutlass & Malibu | In Left Wheelwell Housing | |
| "W" Body | ||
| Intrigue, 1998 Regal & Century, Lumina & Monte Carlo | Behind Left Side Of Instrument Panel | |
| 1999 Lumina & Monte Carlo | Right Hand Side Of instrument Panel, above Instrument Panel Compartment | |