Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Oldsmobile >> 1997 >> Achieva SL, 2.4 T, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Keyless Entry System - Remote) >> System Testing >> Remote Keyless Entry & Illuminated Entry >> Door Do Not Lock From Either Remote Transmitter

Door Do Not Lock From Either Remote Transmitter

WARNING: This page is about a different car, the 1997 Oldsmobile Cutlass and 1997 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect remote control door lock receiver Black 16-pin connector. See Figure . Connect a fused jumper between remote control door lock receiver connector terminals "P" (Orange wire) and "R" (Light Blue wire). If doors lock, go to next step. If doors do not lock, go to step 3).
  2. Replace remote control door lock receiver. Verify system operation.
  3. Using a fused jumper connected to battery voltage, backprobe LH I/P wiring harness junction block connector C3 terminal B3 (Light Blue wire). If doors lock, go to next step. If doors do not lock, go to step 5).
  4. Repair open circuit in Light Blue wire between remote control door lock receiver and LH I/P wiring harness junction block. Verify system operation.
  5. Replace LH I/P wiring harness junction block. Verify system operation.
scientia non olet · About Mike's Workshop Manuals