Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Oldsmobile >> 1997 >> Achieva SC, 2.4 T, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Body Control Module) >> Diagnosis & Repair >> DTC B2575, ALC Headlight System Fault

DTC B2575, ALC Headlight System Fault

WARNING: This page is about a different car, the 1997 Oldsmobile Cutlass and 1997 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. If BFC diagnostic system check was performed, go to next step. If BFC diagnostic system check was not performed, go to BFC DIAGNOSTIC SYSTEM CHECK  .
  2. If no other ALC DTCs exist, go to next step. If any other ALC DTCs exist, repair those DTCs first.
  3. Turn low beam headlights on. If both low beam headlights illuminate, go to next step. If not, go to step 7).
  4. Using scan tool, read BFC INPUT for LOW BEAM/DRL FEEDBACK. If scan tool displays DRL ON, go to next step. If scan tool does not display DRL ON, go to step 7).
  5. Turn high beam headlights on. If both high beam headlights illuminate, go to next step. If not, go to step 7).
  6. Using scan tool, read BFC INPUT for HIGH BEAM FEEDBACK. If scan tool displays HIGH BEAMS ON, go to step 8). If scan tool does not display HIGH BEAMS ON, go to next step.
  7. Locate and repair problem in headlight and DRL system. See appropriate wiring diagram in HEADLIGHT SYSTEMS & DAYTIME RUNNING LIGHTS article.
  8. Replace BFC. See REMOVAL & INSTALLATION  . Go to next step.
  9. Clear DTCs. Perform BFC DIAGNOSTIC SYSTEM CHECK  .
scientia non olet · About Mike's Workshop Manuals