Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Oldsmobile >> 1995 >> Ninety-Eight 3.8 1 >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine Controls - Remove/Install/Overhaul) >> Fuel System >> Fuel Pressure Regulator >> Installation

Fuel Pressure Regulator: Installation

WARNING: This page is about a different car, the 1995 Pontiac Bonneville, 1995 Oldsmobile Eighty-Eight, and 1995 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. DO NOT  reuse "O" rings. Lubricate fuel inlet "O" ring with oil and install in regulator. Replace filter screen as necessary. Tighten screws to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About Mike's Workshop Manuals