Removal & Installation
Disconnect negative battery cable. Open trunk lid. Remove left inner trim panel. Disconnect 2 electrical connectors. Drill out module rivets. Remove module. See Fig 1 . To install, reverse removal procedure. Program module to match transmitter(s). See PROGRAMMING .
KEYLESS ENTRY COMPONENT LOCATION
| Component | Location |
|---|---|
| Automatic Door Lock Relay | Left Side Of Instrument Panel, Attached To Upper Instrument Panel Brace |
| Convenience Center | Left Side Of Instrument Panel, Above Fuse Block |
| Door Unlock Module | Right Center Of Instrument Panel, Near Center Console Harness |
| Fuse Block | Behind Instrument Panel, Left Of Steering Column |
| Luggage Compartment Lid Release Solenoid Connector | Underside Of Trunk |
| Multi-Function Alarm Module | Left Side Of Instrument Panel, At Convenience Center |
| Program Connector | Left Rear Of Trunk |
| Remote Keyless Entry Module | Left Rear Of Trunk, At Left Hinge |