Code 43, ESC Error, W/O ESC Module: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1992 Pontiac Firebird, 1992 Oldsmobile Custom Cruiser, 1992 Chevrolet Caprice, 1992 Chevrolet Camaro, and 1992 Cadillac Brougham. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Test numbers refer to numbers on diagnostic chart. If an audible knock is heard from engine at idle, repair internal engine problems before proceeding.
- If tapping on engine does not produce a knock signal on "Scan" tester, try tapping engine closer to sensor before proceeding.
- ECM supplies a 5-volt reference signal on knock sensor line. With knock sensor connected, this signal is pulled low to about 2.5 volts. Knock signal, which is an AC signal, rides on this 2.5-volt DC signal.
- This test determines if knock sensor is faulty or if ESC portion of MEM-CAL is faulty.