Power Circuit Open Test
- Check CLUST fuse. Check that cruise control module terminal "J" is grounded. Check circuit No. 151 (Black wire) for an open circuit. Ensure engine ground is clean and tight.
- Backprobe Pink/Black and Gray wire connector, behind left side of instrument cluster near steering column and check for battery voltage at Pink/Black wire with ignition switch in RUN position. If battery voltage is not present, check and/or repair Pink/Black wire from fuse box to cruise control switch.
- With cruise switch ON, check for continuity between Pink/Black and Gray wires. If switch is open, replace multifunction lever. Check for an open in Gray wire and terminal "A" of cruise control module connector.