Test P: Seat Reclining Functions Operate In One Direction Only
- Measure the voltage at the connected suspect Recliner Switch Connector.
- Measure the battery voltage between Recliner Switch Connector terminals A (ORN/BLK) and E (BLK). See Figure . If the voltage is not as specified, repair the BLK (151, 152, 154) wires.
- Measure the battery voltage between Recliner Switch Connector terminals A (ORN/BLK) and B (BLK). If the voltage is not as specified, repair the BLK (151, 152, 154) wires.
- If all of the voltages are correct, replace the Recliner Switch. See POWER RECLINER SWITCH (TOURING SEDAN) under REMOVAL & INSTALLATION.