Toe-Out On Turns
WARNING: This page is about a different car, the 1988 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Toe-out on turns (turning radius) is a check for bent or damaged parts, and not a service adjustment. With caster, camber, and toe-in properly adjusted, check toe-out with weight of vehicle on wheels. See Fig 1 .
- Use a full floating turntable under each wheel, repeating test with each wheel positioned for right and left turns. Incorrect toe-out generally indicates a bent steering arm. Replace arm, if necessary, and recheck wheel alignment.
CAUTION:
DO NOT
attempt to correct by straightening parts. Damaged parts must be replaced.