Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Oldsmobile >> 1988 >> Toronado Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Anti-Lock Brake System) >> Functional Check >> Chart C2 - Low Brake Fluid Input >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different car, the 1988 Buick Riviera and 1988 Buick Reatta. However, it is still accessible from the selected car via links, so may be relevant.

An actual low brake pressure condition would cause both the BRAKE and ANTI-LOCK lights to turn on. This flow chart addresses a condition where ONLY the BRAKE light is on. Most likely cause would be a short to ground on circuit No. 33 or a shorted fluid level sensor switch.

Fig 1: Low Brake Fluid Input Schematic
G56160
Fig 2: Flow Chart C2, Low Brake Fluid Input
G56162
Fig 3: Flow Chart C2, Low Brake Fluid Input
GB0010970