Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Oldsmobile >> 1988 >> Cutlass Calais Base, 4D Sedan, 2.3 D, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Alignment Specifications

Alignment Specifications

WHEEL ALIGNMENT SPECIFICATIONS

Application Specification
Camber in Degrees (1)
Fraction 51/64 +/- 1
Decimal 0.8 +/- 1
Caster in Degrees (1)
Fraction 1 45/64 +/- 2 32/64
Decimal 1.7 +/- 2.5
Toe-In in Inches (2)
Fraction 0 +/- 3/32
Decimal 0 +/- 0.094
Toe-In in Degrees (2)
Fraction 0 +/- 13/64
Decimal 0 +/- 0.203
Toe-Out on Turns
Inner (3)
Outer (3)
Steering Axis Inclination (SAI) (3)
(1) Degrees per wheel.
(2) Toe-In specification per wheel. Set each side separately.
(3) Information not available.
scientia non olet · About Mike's Workshop Manuals