Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2024 >> Sentra S >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Intelligent Around View Monitor System) >> Removal And Installation >> Av Control Unit >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2023 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

REMOVAL 

CAUTION:

When replacing AV control unit, perform "ADDITIONAL SERVICE WHEN REPLACING AV CONTROL UNIT. Refer to Description .

  1. Disconnect the negative battery terminal. Refer to Battery Disconnect .
  2. Remove cluster lid C. Refer to Removal and Installation
  3. Remove the AV control unit screws, then pull out the AV control unit.
  4. Disconnect the harness connectors from the AV control unit and remove.
  5. If necessary, remove the AV control unit bracket (LH/RH) screws and the AV control unit brackets (LH/RH).

INSTALLATION 

Installation is in the reverse order of removal.

CAUTION:

When replacing AV control unit, perform "ADDITIONAL SERVICE WHEN REPLACING AV CONTROL UNIT". Refer to Description .