Diagnosis Procedure
Motor does not start when power switch is pressed.
SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS)
| Door lock operation (remote keyless entry) | Door lock operation (request switch) or back door open operation (opener switch of back door panel) | Motor started with power switch operation (registered Intelligent Key is within the detection area of inside key antenna) | Motor started with power switch operation (registered Intelligent Key placed next to power switch) |
|---|---|---|---|
| OK | OK | No start | No start |
CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
"Motor START BY I-KEY" setting in "Work support" mode of "BCM (INTELLIGENT KEY) " is ON.
DIAGNOSIS PROCEDURE
Refer to Diagnosis Procedure.
- CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
Check Intelligent Key system symptom table. Refer to Diagnosis Procedure .
>>
GO TO 2.
- PERFORM SELF DIAGNOSTIC RESULT
CONSULT Select "Self Diagnostic Result" mode of all systems, and check if DTC is detected.
>>
Follow troubleshooting for each DTC.