Configuration (Air Bag Diagnosis Sensor Unit): Description

Since vehicle specifications are not yet written in a new air bag diagnosis sensor unit, it is necessary to write then "Re/programming, Configuration" with CONSULT. For details, refer to Work Procedure .

Configuration has three functions as follows.

Function		Description
Before Replace ECU		Reads the vehicle specification of current air bag diagnosis sensor unit. Saves the read vehicle specification.
After Replace ECU	EPC linked	Searched for by using EPC (service parts catalog) to automatically write the Type ID * into the air bag diagnosis sensor unit.
	Manual selection	Searched for by using EPC (service parts catalog) to write the selected Type ID * into the air bag diagnosis sensor unit. Writes the vehicle configuration by manual selection. NOTE: This item is displayed, but not used.

*: For the Type ID, that part number (vehicle specification) to be written to the air bag diagnosis sensor unit.