Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2023 >> Maxima SR >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System (DTC/Circuit Diagnosis) >> DTC/Circuit Diagnosis >> C1608 Power Steering Control Module >> DTC Diagnosis Procedure

DTC Diagnosis Procedure

  1. PERFORM SELF DIAGNOSTIC RESULT 
    1. SYMBOL CONSULT
      1. Ignition switch OFF to ON.
      2. Erase "Self Diagnostic Result" mode of "EPS/DAST 3".
      3. Ignition switch OFF and wait for at least 10 seconds.
      4. Select "Self Diagnostic Result" mode of "EPS/DAST 3".

    Is DTC "C1608" detected?

    YES>>

    Power steering control module is malfunctioning. Replace power steering oil pump assembly. Refer to Removal and Installation .

    NO>>

    Check pin terminal and connection of each harness connector for malfunctioning conditions.

scientia non olet · About Mike's Workshop Manuals